AutoTronix Lab
Airbag & SRS System Repairs in Muscat
Airbag warning light diagnosis, crash data clearing, SRS module repair, and seat belt pretensioner service at AutoTronix Lab.
About This Service
AutoTronix Lab diagnoses and repairs airbag and SRS (Supplemental Restraint System) faults in Mabellah Industrial, Muscat. Services include airbag warning light investigation, SRS fault code diagnosis, crash data clearing from the airbag module after an accident, seat belt pretensioner fault diagnosis, and SRS module repair or replacement. This is safety-critical work, so the diagnosis has to be right before anything is repaired or reset.
Common Symptoms
Signs that point to this service
- Airbag warning light on the dashboard (solid or flashing)
- SRS warning light on after an accident, even a minor collision
- Seat belt warning light on despite being correctly fastened
- Airbag warning light on after battery replacement or electrical work
- Vehicle purchased used with airbag light already on
- SRS fault codes present following workshop or body repair work
- Seat belt pretensioner not functioning correctly after deployment
When is this service needed?
An illuminated airbag warning light means the SRS system cannot confirm that it will deploy correctly in an accident.
This is a safety issue that should not be deferred. Airbag systems can also be affected by electrical faults, connector corrosion, and clock spring failures that have nothing to do with a collision. AutoTronix Lab identifies the actual cause before recommending any work.
What AutoTronix Checks
Inspection & Diagnostic Points
- ✓Full SRS system diagnostic scan: all fault codes and module status
- ✓Crash data in the airbag module (records of impact events)
- ✓Seat belt pretensioner status and fault codes
- ✓Clock spring continuity and fault status
- ✓Impact sensor condition and readings
- ✓SRS module power and ground supply
- ✓Connector and wiring harness condition in SRS circuit
How The Process Works
Clear steps from start to finish
Fault or concern report
You describe the symptom: a warning light, a system failure, or a change in how the car behaves. We record exactly what the vehicle is doing and when.
Full system diagnostic scan
We connect to all accessible ECUs, read active and stored fault codes, and capture live data across all vehicle systems.
Root cause analysis
We analyse the scan data and inspect the relevant components to confirm the exact cause behind the fault code.
Estimate and approval
You receive a clear explanation and cost estimate. No work proceeds without your explicit approval.
Repair, programming, or update
We fix the confirmed fault with whatever it needs: a wiring repair, module programming, a software update, or a component replacement.
Verification and sign-off
After the work, we re-scan all systems to confirm fault codes are resolved and the vehicle is functioning correctly before handover.
Why AutoTronix
YOU ARE THE PRIORITY.
- →Workshop at a permanent address in Mabellah Industrial, Muscat
- →Multi-system diagnostic equipment covering all major vehicle manufacturers
- →Programming and coding capability for European, Japanese, Korean, and American vehicles
- →No work begins without your explicit approval and cost estimate
- →Booking via WhatsApp (+968 9966 7600) or the AutoTronix app
- →VIP members get priority booking and 30% off labour at Garage, Lab and Express
- →YOU ARE THE PRIORITY.
Otto Explains
Understand your car before any repair decision.
Otto helps AutoTronix customers understand symptoms, warning lights, diagnostics, and repair decisions before work begins.
Frequently Asked Questions
Driving with the airbag warning light on means the system may not deploy in an accident. While the vehicle may otherwise drive normally, the safety risk is significant. We recommend having it diagnosed promptly.
Even a minor collision can trigger impact sensors and store crash data in the SRS module. Depending on the manufacturer and the event recorded, the module may need its crash data cleared or may need to be replaced, and the impact sensors and wiring must be checked. The light should only go off once the whole system has been verified as working correctly.
Battery replacement can reset some module memory or temporarily disrupt the SRS network. If the light remains on after a battery replacement, there is likely a stored fault code that requires diagnosis.
In many cases, where the manufacturer permits it, crash data can be cleared from the module and the system reset, provided the physical components were not damaged in the collision. Clearing crash data does not restore a system after a deployment: deployed airbags and fired seat belt pretensioners are single-use and must be replaced, and the module and impact sensors often need replacement too, following the manufacturer procedure. The complete system is then scanned and verified before the vehicle is returned.
We handle SRS diagnostics and repair for European, Japanese, Korean, and American vehicles. Contact us with your make and model to confirm coverage.
Ready to check your vehicle?
Book Airbag & SRS System Repairs in Muscat at AutoTronix Lab, Mabellah Industrial, Muscat.
Mabellah Industrial, Street 7, Muscat · Saturday – Thursday · 9:00 AM – 9:00 PM